SAAS Oil Pressure Gauge Adapter for Holden Commodore VZ Series V6 Engines
$48.90
In stock
SAAS Black Oil Pressure Gauge Adaptor for V6 Engines
Suits:
Holden Commodore - VZ V6 Series 2 (VE engine)
Holden Commodore - VE V6
- M16 x 2mm thread with 1/8 NPT auxiliary port
- Allows the use of aftermarket gauge senders whilst still retaining original factory gauge
- Manufactured from CNC6061- T6 machined aluminium
Instructions:
Located on the side of the engine block, carefully remove the factory sender. Once removed, begin by
carefully screwing down the SAAS adaptor by hand. It is IMPORTANT that the auxiliary port is facing the correct position, so the aftermarket sender can be fitted. Once the adaptor is in position, you can then tighten the adaptor with a spanner (make sure you do not over-tighten, as this could strip the thread). Once tightened, screw in the aftermarket gauge sender. Once installation is complete and the engine has been running, SAAS recommends you check for oil leaks.
SAAS Black Oil Pressure Gauge Adaptor for V6 Engines
Suits:
Holden Commodore - VZ V6 Series 2 (VE engine)
Holden Commodore - VE V6
- M16 x 2mm thread with 1/8 NPT auxiliary port
- Allows the use of aftermarket gauge senders whilst still retaining original factory gauge
- Manufactured from CNC6061- T6 machined aluminium
Instructions:
Located on the side of the engine block, carefully remove the factory sender. Once removed, begin by
carefully screwing down the SAAS adaptor by hand. It is IMPORTANT that the auxiliary port is facing the correct position, so the aftermarket sender can be fitted. Once the adaptor is in position, you can then tighten the adaptor with a spanner (make sure you do not over-tighten, as this could strip the thread). Once tightened, screw in the aftermarket gauge sender. Once installation is complete and the engine has been running, SAAS recommends you check for oil leaks.
| SKU | AC SGA1006-001 |
|---|---|
| Free Shipping | Australia Wide |
Write Your Own Review